Shopping Cart
0 items
 

FIAT 500 ABARTH / 500T HIGH FLOW INTAKE DIY KIT - CARBON CANISTER DESIGN

FIAT 500 ABARTH / 500T HIGH FLOW INTAKE DIY KIT - CARBON CANISTER DESIGN
Click to enlarge
Price: $273.74
Availability: In Stock
Model: A / T
Average Rating: Not Rated

Qty: Add to Cart

FIAT 500 ABARTH/ 500T High Flow Intake DIY Kit

This DIY Intake Kit allows you to design and install a custom intake on your ABARTH / 500T while minimizing the intake sound that is created by other "open" designs.

 

Features:

  • Complete DIY Kit with hardware
  • Carbon Fiber Airbox - Low Thermal Conductivity
  • Washable Filter Element - Ne need to purchase replacement filters
  • Sealed System that draws air directly from the outside of the vehicle
  • Fully Reversible
  • Lightweight Design
  • Race Track Tested Design

 

You can install this intake by simply following the picture shown in the product description of the ABARTH Race Car with this same intake installed. The install is pretty straight forward and all hardware needed comes with the kit.

This intake system draws air directly from the front air inlet vent that is located in the front of the ABARTH500T Bumper. The air is then forced through a flexible, lightweight hose directly to the Carbon Fiber Air Box that is placed at the rear portion of the engine bay (see pictures)

Due to this design you get a system that guides fresh air directly to the air box at a speed and capacity greater than that of traditional systems. The air flow entering the carbon fiber air intake housing is then accelerated further thanks to the help of the air flow deflector that is located inside the carbon fiber airbox.

Greater Air Flow, Lower Intake Temperatures, Higher Pressure all help with maximizing the performance of your 500.

Save money by purchasing this DIY Kit!

This system is designed for the North American FIAT 500 ABARTH and 500 Turbo model years of 2013-2014. It will not work on the 2015 model unless you do some modifications and install the airbox sensors in the new unit.



Special Note for California Customers: This intake system is not CARB Certified (California Air Resource Board) at this time and is not legal for use in California on pollution controlled vehicles. If you are purchasing this intake in California you are stating that you are using it only on a vehicle that is being used for Race Use Only/ Off Road.

 

This is a close out item. All sales final. No returns or exchanges.

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

FIAT 500 ABARTH / 500T HIGH FLOW INTAKE DIY KIT - CARBON CANISTER DESIGN
Click to enlarge
FIAT 500 ABARTH / 500T HIGH FLOW INTAKE DIY KIT - CARBON CANISTER DESIGN
Click to enlarge
FIAT 500 ABARTH / 500T HIGH FLOW INTAKE DIY KIT - CARBON CANISTER DESIGN
Click to enlarge

Copyright 2020 Soler Motorsports. All Rights Reserved.

Copyright 2020 Soler & Associates Corp. DBA Soler Motorsports All rights reserved. Soler Motorsports is an independent site and company that is not affiliated with FIAT USA or FIAT Group. Soler Motorsports and its logo are registered trademarks of Soler & Associates Corp. All other company and/or product names, descriptions, or written content may be tradenames, trademarks, and/or registred trademarks of the respective owners with for which they are associated.